Each cable is made to your dimensions and consists of:
- 4mm diameter stainless steel rope
- Two surface mounting sockets
- One attached ball & one removable threaded ball
- One tensioning adjuster with lock nut
- Supplied complete with all relevant fixings
Delivered 2 to 3 days from order
How to measure your balustrade cables:
Remember - measure twice, cut once! Please be as accurate as possible. Each cable will have an adjustment of plus or minus 20mm.
To specify the required length of balustrade assemblies, measure the distance between the inside posts in millimetres.
TIP: You can run through intermediate posts to minimise the number of cables you'll need!
Feeding through posts:
the threaded ball can be unscrewed allowing you to feed the cable through intermediate posts (you'll need a clearance hole of at least 7mm).
The system can be mounted in 2 ways:
- To timber posts or masonry wall surfaces using a 3" countersunk wood screw (specify WOOD MOUNT)
- To tubular or box section steel posts using a tube clip with an M6x20 countersunk head screw in a drilled clearance hole of 22.2mm (specify TUBE MOUNT)
Tubular post or box section post mounting method:
